About the Sulzer Mixpac MFH Static Mixer Nozzle
What makes the Sulzer MFH Series static mixer unique is the outlet that connects the nozzle to the cartridge. This patented design is unique to Sulzer allowing the two materials to enter the nozzle through their own orifice completely eliminating the possibility of cross contamination.
The MFH mixers are used for dispensing 1:1 and 2:1 ratio adhesives like epoxy, silicone, urethane and acrylics. These nozzles are for use with Sulzer F Series 200mil and 400mil cartridges.
* Contact us for bulk discounts or less than case quantities on the Sulzer MFH Series mixers.
Sulzer MFH Nozzle Configurations
- Sulzer MFH 06-18T
- Sulzer MFH 06-24T
- Sulzer MFH 06-32T
- Sulzer MFH 08-18T
- Sulzer MFH 08-24T
- Sulzer MFH 08-32T
- Sulzer MFH 10-18T
- Sulzer MFH 10-24T
- Sulzer MFH 10-32T
Helpful Hint: The Sulzer MFHX Series is used for dispensing 4:1 and 10:1 ratios.
Sulzer Mixpac MFH Static Mix Nozzle Specifications
Mixer helix, 1:1/2:1 with white elements & stepped tip
Part Number | Article/Number | Elements | Ø(mm) | L(mm) | Vol. (ml) |
102466 | MFH 06-18T | 18 | 6 | 156 | 4.36 |
102467 | MFH 06-24T | 24 | 6 | 194 | 5.4 |
116040 | MFH 06-32T | 32 | 6 | 245 | 6.65 |
102468 | MFH 08-18T | 18 | 8 | 187 | 7.4 |
102469 | MFH 08-24T | 24 | 8 | 234 | 9.3 |
102470 | MFH 08-32T | 32 | 8 | 297 | 11.85 |
102471 | MFH 10-18T | 18 | 10 | 224 | 13.09 |
102472 | MFH 10-24T | 24 | 10 | 283 | 16.89 |
110583 | MFH 10-32T | 32 | 10 | 362 | 21.94 |